Jabra Bluetooth Headset - Manual (Page 13)

12
ENGLISH
JABRA SUPREME
* Phone dependent
”Disconnected” Announced if a connected phone/
device is turned off, goes out of
range or has BT disabled while in
range and while the speakerphone
is still turned on .
”Battery level is low” Announced when the battery level
goes below 10%
”Voice on/off” Announced when voice guidance
and controls are enabled or disabled
”Call from
phone address book or
number>”*
Announced when there is an
incoming call if your phone/device
supports caller ID (PBAP)
ADDITIONAL FEATURES
Play music, podcasts and GPS Announcement*
If your phone or device supports A2DP audio streaming you can
hear your music or any other audio through your Jabra SUPREME .
Simply start playing your music or start your application and the
audio will automatically transfer to SUPREME . If your phone rings
the audio will mute and you can answer or ignore the call . The
audio will resume after the call .*
Using you Jabra SUPREME with two mobile devices at the
same time
The Jabra SUPREME supports Advanced MultiUse™ and is capable
of having two mobile phones (or other Bluetooth® devices)
connected at the same time . This will give you the freedom of
having only one headset to operate both of you mobile phones/
devices .
When you have two active phones/devices connected you will
hear ”Two devices connected” . In this state the phone paired last
will be used for voice dialing . When two phones are connected
you can place and answer calls on both and switch between
the two . If you are on a call and receive a second call you will be
alerted by a tone . You can then:
- Put the first call on hold and accept the incoming call by
pressing the Answer/end button
- Switch between the two active calls by pressing the Answer/
end button again