Jabra Bluetooth Headset - Manual (Page 5)

4
ENGLISH
JABRA SUPREME
GETTING STARTED
Please follow these steps before using the Jabra SUPREME:
1 Charge the Jabra SUPREME using the supplied AC charger and
USB cable .
2 Activate Bluetooth® on your phone or device (refer to the
manual of your device)
3 Turn your Jabra SUPREME on by flipping open the boom, and
pair it with your mobile device by following the voice guidance .
NOTE: Voice Guidance and Voice commands are enabled as the
default setting when you turn on your Jabra SUPREME the first
time . You can at any time disable both by pressing the Voice
button while you flip the boom arm to On position . You will hear
”Voice off” and SUPREME will no longer talk to you or listen for
commands . Repeat the process to enable the voice features again .
CHARGE YOUR JABRA SUPREME
Make sure that your headset is fully charged before you start
using it . Use the USB cable to connect Jabra SUPREME to a
USB port or use an AC charger . The battery indicator light will
Flash Green while charging . When light goes out the charge is
complete . A full charge takes approximately two hours . .
Only use the charger provided in the box – do not use chargers
from other devices as this may damage your headset . Also you
should not use your supplied SUPREME charger to charge other
devices .
NOTE: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .
WEARING STYLE
The Jabra SUPREME is ready to be worn for right ear wearing, but
if you prefer left ear wearing remove the ear hook and turn it and