John Deere PowerTech 4045H - Manual (Page 17)

PAGES
30–31
Standard Z-Bar Information with Quick-
Coupler and Hook-On Construction Fork
624J
▲
Tine Length . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 in. (1.22 m) 60 in. (1.52 m)
▲▲
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . 26 ft. 2 in. (7.98 m) 27 ft. 2 in. (8.28 m)
Tipping Load, Straight (fork level, load
centered 24 in. [610 mm] forward
on tine). . . . . . . . . . . . . . . . . . . . . . . . . . . 21,136 lb. (9587 kg)
19,822 lb. (8991 kg)
Tipping Load, 40-Deg. Full Turn (fork
level, load centered 24 in. [610 mm]
forward on tine) . . . . . . . . . . . . . . . . . . . . 18,991 lb. (8614 kg)
17,782 lb. (8066 kg)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . 33,120 lb. (15 023 kg) 33,446 lb. (15 171 kg)
High-Lift Z-Bar Pin-On-Type Bucket Information
General Purpose
Bucket Type/Size w/Bolt-On Edge
Capacity, Heaped SAE . . . . . . . . . . . . . . . . . . . 3.5 cu. yd. (2.7 m 3 )
Capacity, Struck SAE . . . . . . . . . . . . . . . . . . . . 3.0 cu. yd. (2.3 m 3 )
Bucket Weight . . . . . . . . . . . . . . . . . . . . . . . . . 2,630 lb. (1193 kg)
Bucket Width . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ft. 10 in. (2.69 m)
Breakout Force, SAE J732C . . . . . . . . . . . . . . . 25,884 lb. (11 741 kg)
Tipping Load, Straight . . . . . . . . . . . . . . . . . . . 24,998 lb. (11 329 kg)
Tipping Load, 40-Deg. Full Turn, SAE . . . . . . . . 22,392 lb. (10 157 kg)
Reach, 45-Deg. Dump, 7-ft. (2.13 m)
Clearance . . . . . . . . . . . . . . . . . . . . . . . . . 6 ft. 4 in. (1.94 m)
▲▲
Reach, 45-Deg. Dump, Full Height. . . . . . . . . . 3 ft. 8 in. (1.12 m)
▲
Dump Clearance, 45 Deg., Full Height . . . . . . . 10 ft. 8 in. (3.25 m)
▲▲▲
Overall Length, Bucket on Ground . . . . . . . . . . 26 ft. 2 in. (7.98 m)
Loader Clearance Circle, Bucket In Carry
Position . . . . . . . . . . . . . . . . . . . . . . . . . . 40 ft. 10 in. (12.45 m)
Operating Weight. . . . . . . . . . . . . . . . . . . . . . . 33,587 lb. (15 235 kg)
Loader operating information is based on machine with standard equipment; cab; rear cast bumper/counterweight; 20.5R25 tires; ROPS cab; 175-lb. (79 kg) operator; and full fuel tank. This
information is affected by tire size, ballast, and different attachments.
Adjustments to Operating Weights with High-Lift Z-Bar Pin-On Buckets
Adjustments to operating weights and tipping loads for 3.5-cu.-yd. (2.7 m 3 ) general-purpose bucket with bolt-on cutting edge and optional rear cast bumper/counterweight
Add (+) or deduct (–) lb. (kg) as indicated for Tipping Load, 40-
loaders with three-piece rims and Operating Weight Tipping Load, Straight Deg. Full Turn, SAE
20.5 R 25, L-3T tires . . . . . . . . . . . . . . . . . . . . 0 lb. (0 kg) 0 lb. (0 kg) 0 lb. (0 kg)
20.5 R 25, 1 Star L-2 tires. . . . . . . . . . . . . . . . – 348 lb. (– 158 kg) – 254 lb. (– 115 kg) – 251 lb. (– 114 kg)
20.5-25, 16 PR L-2 tires . . . . . . . . . . . . . . . . . – 696 lb. (– 316 kg) – 516 lb. (– 234 kg) – 507 lb. (– 230 kg)
20.5-25, 16 PR L-3 tires . . . . . . . . . . . . . . . . . – 518 lb. (– 235 kg) – 384 lb. (– 174 kg) – 377 lb. (– 171 kg)
600/65 R 25, L-3T tires** . . . . . . . . . . . . . . . . + 597 lb. (+ 271 kg) + 463 lb. (+ 210 kg) + 456 lb. (+ 207 kg)
28L-26 Logger*. . . . . . . . . . . . . . . . . . . . . . . . + 732 lb. (+ 332 kg) + 562 lb. (+ 255 kg) + 556 lb. (+ 252 kg)
CaCl
2
in 20.5-25 rear tires. . . . . . . . . . . . . . . . + 2,571 lb. (+ 1166 kg) + 3,799 lb. (+ 1723 kg) + 3,355 lb. (+ 1522 kg)
Optional rear cast bumper/counterweight
(removed) . . . . . . . . . . . . . . . . . . . . . . . . . – 712 lb. (– 323 kg) – 1,763 lb. (– 800 kg) – 1,474 lb. (– 669 kg)
*Equipped with one-piece rims.
**CaCl
2
not recommended with 600/65 R 25 tires.