Jura Capresso S7 - Manual (Page 25)

25
Once started, the decalcifying program must not be inter-
rupted.
Always wait until the decalcifying agent has been used up
and the tank is empty. Never fill in additional decalcifying
agent.
Ⅲ
SELECT PRODUCT
DE-SCALE MACHINE
Ⅲ Press Rinse
until the following message appears:
Ⅲ
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Empty out the drip tray (1) and integrated coffee grounds bin.
Ⅲ
TRAY
MISSING
Ⅲ Place the empty, clean drip tray (1) and integrated coffee
grounds bin back into the IMPRESSA.
Ⅲ
AGENT IN TANK /
PRESS STEAM
Ⅲ Take out the water tank (14). Empty out any remaining water.
Completely dissolve the content of one blister (3 tablets) in a
receptacle containing 0.6 litres of water, and pour the mixture into
the water tank. Place the water tank back into the machine.
Ⅲ Remove the 2-stage frothing jet (24) or Professional-Cappuccino
Frother from the machine (if attached).
Ⅲ Place a tall receptacle under the pivoting steam spout (23) and
press one of the Steam keys .
Ⅲ
MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
Ⅲ
OPEN TAP
Ⅲ Place the receptacle under the hot water spout (25).
Ⅲ Turn the Hot Water key (22) to the symbol.
Ⅲ
MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
Ⅲ
CLOSE TAP
Ⅲ Turn the Hot Water key (22) to the
symbol.
Ⅲ MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
Ⅲ
EMPTY TRAY /
EMPTY GROUNDS
Ⅲ Empty out the drip tray (1) and integrated coffee grounds bin.
Ⅲ
TRAY
MISSING
Ⅲ Place the empty, clean drip tray (1) and integrated coffee
grounds bin back into the IMPRESSA.
Ⅲ
RINSE WATER TANK /
FILL WATER TANK
Thoroughly rinse out the water tank and fill it with fresh cold
tap water. Then place it back into the IMPRESSA.
Ⅲ PRESS STEAM
Ⅲ Place a receptacle under the pivoting steam spout (23).
Ⅲ Press one of the Steam keys
.
Ⅲ
MACHINE
DE-SCALING
Ⅲ You will hear an acoustic signal.
Ⅲ
OPEN TAP
Ⅲ Place the receptacle under the hot water spout (25).
Ⅲ Turn the Hot Water key (22) to the symbol.
E