JVC PK-CL200U - Manual (Page 7)

8) Install the filter unit.
Position the filter assembly back into its place, being careful not to
touch the surface of the filter. Position the three screws and tighten
using an correct-sized coin.
9) Reinstall the filter cover.
Place the filter cover over the filter. Insert the four screws and tighten
them using the screwdriver.
10) Reinstall the speaker cover.
Replace the bottom of the speaker cover first. Insert the two pegs
located at the bottom of the cover into the holes at the bottom lip of
the television cabinet. When the pegs are in place, gently press the
top part of the speaker cover against the television to reinstall. Once
the speaker cover is back in place you may plug the television back
into the AC power supply and return to normal television viewing.
If you have read the installation instructions and do not feel comfort-
able changing the lamp yourself, please call for a service technician.
Continued on the next page 7