Model: allagash b-vent gas stove – Jotul GF 3 BV User Manual

Page 2

THIS STOVE IS SHIPPED AS A

NATURAL GAS STOVE ONLY.

IF USE WITH PROPANE IS

DESIRED, THE STOVE MUST BE

CONVERTED TO USE WITH

PROPANE. FOR YOUR

CONVENIENCE THE STOVE IS

SHIPPED WITH A PROPANE

CONVERSION KIT.

Model: Allagash B-Vent

Gas Stove

Manufactured and

Distributed by:

Jøtul A.S.A.

Fredrikstad, Norway

Jøtul North America

Portland, Maine

TABLE OF CONTENTS:

WELCOME TO JØTUL......................3
STANDARDS......................................................4
GENERAL INFORMATION.........................4
LOCATION.....................5
FLOOR PROTECTION........................6
STOVE CLEARANCES....................6

ALCOVE................................................6
PARALLEL INSTALLATION..................6
CORNER INSTALLATION......................6
MANTEL, CEILING AND TRIM.............6

VENTING REQUIREMENTS.................7

HEARTHMOUNT...................................8
VENTING GRAPH.................................9

GAS CONVERSION..........................10
GAS CONNECTION.........................12
GAS PRESSURE.........................12
HIGH ALTITUDE INSTALLATIONS..............13
AIR SHUTTER ADJUSTMENTS..................14
INSTALLING THE LOG SET............15
INSTALLING DECORATIVE PIPE BRACKETS....15
INSTALLING THE BLOWER..............................16
REMOTE/THERMOSTAT.................................17
SPILL SWITCH OPERATION.............................17
CHECKING THE SYSTEM...................18
OPERATION OF APPLIANCE...........................19
MAINTENANCE..............................................19
REPLACEMENT PARTS....................................21
ILLUSTRATED PARTS .......................22
LIGHTING INSTRUCTIONS ........Inside Back Cover

THIS OWNERS OPERATING AND INSTRUCTIONS MANUAL IS DESIGNED TO

GIVE YOU A SAFE, EFFICIENT, DEPENDABLE INSTALLATION OF YOUR

ALLAGASH B-VENT GAS STOVE.

PLEASE READ THESE INSTRUCTIONS IN THEIR ENTIRETY AND MAKE THEM

AVAILABLE TO ANYONE USING OR SERVICING THE GAS STOVE.

SUGGESTED TOOL LIST FOR

INSTALLLATION AND SERVICE:

*External regulator (for LPG only)

*Piping which complies with local code

*Manual shutoff valve

*Sediment trap

*Tee joint

*Pipe wrench

*Pipe sealant

*10mm open end wrench

*1/2, 7/16 open end wrench

*Phillips head screwdriver

*Flat head screwdriver

*1/4 nut driver

*Gloves

*Safety glasses

*Torx T20 screwdriver

*Leak test solution