JL Audio SB-K-SL-12W0v2 - Manual

I n s t a l l a t I o n G u I d e
for the
SB-K-SL-12W0v2
sKu#94493,94494
2010 +
Thank you for choosing a JL Audio Stealthbox ® for your automotive sound system. With proper
installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox ® installed by your authorized JL Audio
dealer. The installation professionals employed by your dealer have the necessary tools and experience
to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage
extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you
prefer to perform your own installation, please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox ® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
s t e P 1
Empty out the trunk of the car so that you have a clean area
to work in.
Continued on Next Page
s t e P 2
Lift the floor, remove the compartmented foam spacer this
will not remain in the vehicle.
s t e P 3
Remove the tool kit that resides inside the spare tire and the
spare tire itself, set aside the hardware as it will be re-used.
SB-K-SL-12W0v2 INSTR_SKU# 011315
InstallatIon
d I F F I C u lt Y :
2
5
out
oF
estImated tIme:
1 HouR