JVC CD/DVD Library MC-8200LU - Manual (Page 26)

E25
ENGLISH
7-7. Drive type display
1.
Press the MODE key while the LCD display is in nor-
mal display mode (to display Menu display).
2.
Press the SELECT key 8 times (to display "9. DRIVE
DISPLAY").
3.
Press the ENTER key (to select "9. DRIVE DISPLAY").
4.
The type of the drive in each drive bay will be displayed.
(Each press of the SELECT key displays the informa-
tion on the next drive.)
Check the types of the installed drives as follows.
1 . N O R M A L D I S P L A Y
2 . E R R O R D I S P L A Y
9 . D R I V E D I S P L A Y
1 . N O R M A L D I S P L A Y
D R 1 : D V D – R A M
D R 2 : R O M / R
e t c
R 2 : R O M / R e t c
D
D
R 3 : R O M / R e t c
D R 6 : N O D R I V E
D R 1 : D V D – R A M
SELECT
SELECT
SELECT
Meaning of the display
"DVD-RAM" : DVD-RAM/R drive
"NO DRIVE" : Drive is not connected or installed
"ROM/R etc" : Non DVD-RAM/R drive (CD-ROM/R, DVD-ROM, etc.)
"UNKNOWN" : When drive detection mode has not been executed.
● If the automatic drive detection mode has not been executed, the
LCD displays “UNKNOWN DRIVE DETECTED”.
U N K N O W N D R I V E
T Y P E D E T E C T E D
Drive Units
● If the type displayed for an installed drive is erroneous or if [NO DRIVE] or [UNKNOWN] is displayed, the cable connection to the
drive may be missing or the wrong one. Check the cable connection and drive type again.
MC-8200LU_8600LU INST(E) 04.10.29, 2:08 PM 25