JVC KS-FX270 - Manual (Page 26)

26
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Note on One-Touch Operation:
When you press
CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
3
1
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See “Selecting the external component to use” on page 27.)
1
Select the external component.
• If “LINE IN” does not appear on the display, see page 27
and select the external input (“EXT IN”).
2
Turn on the connected device and start playing the source.
3
Adjust the volume.
To turn up the
volume
To turn down
the volume
EN24-30.KS-FX270[J]/f 00.11.10, 10:51 AM 26