JVC CA-MXJD8UW - Manual (Page 90)

23
Setting the Clock
Without setting the built-in clock, you cannot use Daily/
Recording Timers (see page 40) and Sleep Timer (see next
column).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL/DEMO.
1 Activate clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2 Adjust the hour.
3 Adjust the minute.
Now the built-in clock starts working.
To check the current time during play
Turning Off the Power Automatically
With Sleep Timer, you can fall asleep listening to music.
1 Specify the time (in minutes).
2 Wait until the set time goes off.
To check the time remaining until the shut-off time
INFO
Main Unit
ONLY
CLOCK
/ TIMER
SET
/ DISPLAY
PRESET
SET
/ DISPLAY
PRESET
SET
/ DISPLAY Clock
Source information
2 sec.
• If you press repeatedly, you can change the
shut-off time.
Remote
ONLY
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
SLEEP 90 SLEEP 120 Canceled
SLEEP
MX-JD5&8[UX].book Page 23 Monday, April 26, 2004 2:22 PM