JVC CA-MXJD8UW - Manual (Page 152)

22
English
Changing the Picture Tone
While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
likeliness.
To select a preset picture tone
1 Activate VFP.
2 Select a preset picture tone.
To adjust the picture tone
1 Select “USER1” or “USER2.”
• Follow steps 1 and 2 explained above.
2 Select a parameter you want to adjust.
3 Adjust the parameter.
4 Repeat steps 2 to 3 to adjust other parameters.
5 Finish setting.
Changing the Display Brightness
You can dim the display window.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings (see below).
Remote
ONLY INFO
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0 0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
0
On the TV screen
NORMAL CINEMA
USER2 USER1
GAMMA Adjust if the neutral color is bright
or dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
BRIGHTNESS Adjust if the picture is bright or
dark as a whole (–8 to +8).
CONTRAST Adjust if the far and near position
is unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
Remote
ONLY
DIMMER
NORMAL
MX-JD5&8[UW].book Page 22 Wednesday, May 12, 2004 3:28 PM