Jet Tools M-708640 - Manual (Page 7)

7
WARNING
Read and understand the entire contents of
this manual before attempting assembly or
operation of the dust collector!
Failure to comply may cause serious injury!
Unpacking
1. Remove all contents from the shipping
carton.
2. Report any damage to your distributor.
3. Do not discard any shipping material until
after the dust collector has been assembled
and is running properly.
Contents of the Shipping Carton
DC-650A
1. Base
1. Owner's
Manual
1. Warranty Card
1. Motor/Fan Assembly
1. Collector Bag
1. Filter Bag
4. Casters
1. Support
Cylinder
1. Retaining Strap
1. Filter Bag Support Rod
1. Bag of Assembly Hardware
4. M6x12 Hex Head Bolts
5. M6 Lock Washers
5. M6 Flat Washers
2. 3/8”-16 Acorn Nuts
2. 3/8” Hex Nuts
4. M10 Flat Washers
4. M8x12 Hex Head Bolts
4. M8 Flat Washers
1. M6 Hex Nut
Tools Required for Assembly
2. 14mm Wrenches or Sockets
1. 10mm Wrench or Socket