JBL SURROUND CINEMA SPEAKERS SCS160 - Manual (Page 9)

9
OPERATION
MIN MAX
Subwoofer
Level
MIN MAX
Subwoofer
Level
Move the Master Power
switch (marked “Power”
¡ )
to the “•” (On) position to
use the subwoofer. The
SCS160 subwoofer will auto-
matically turn on or go into
standby (sleep) mode when
left in the auto mode (“Auto/
On” switch ™ in the “Auto”
position). When your
receiver or amplifier is off,
or is not sending program
material to the subwoofer,
the subwoofer will be in
standby mode (LED will be
red). When the subwoofer
senses an audio signal, it will
automatically turn on (LED
will be green). If the sub-
woofer does not sense a sig-
nal after approximately 20
minutes, it will automatically
go back into standby mode.
When the “Auto/On” switch
™ is switched to the “On”
position, the subwoofer will
remain on, whether or not
program material is playing.
If you will be away from
home for an extended period
of time, or if the subwoofer
will not be used, switch the
Master Power switch
¡ to
the Off position.
VOLUME
POWER
HIGH LEVEL
+ – – +
SUBWOOFER
LEVEL
OUT
IN
L R
LINE LEVEL IN
LFE
L
R
AUTO ON
MIN MAX
SUB 160
£
¡
™
IMPORTANT: CONNECT STRIPED WIRE TO RED ( ) SPEAKER TERMINAL.
GREEN: ON
RED: STANDBY
+
A Harman International Company
JBL, Incorporated
Volume may be adjusted
using the Subwoofer Level
control
£ as shown.