JVC HD-61Z786 User Manual
Page 2
6. Remove the lamp unit from the television by
raising the handle and pulling it straight out.
Dispose of lamp in accordance with local
environmental regulations.
7. Insert the new lamp unit by holding the lamp by the
finger pulls and sliding the new lamp straight into the
television, paying attention to the orientation and
direction of insertion. Ensure that the new unit is
firmly seated.
Note: To avoid shortened lamp life and/or reduced
picture quality, do not touch the glass portion of the
new lamp.
9. Replace the lamp cover in the same manner as it was
removed in Step 4. Tighten the screw using your
fingers or a Philips screwdriver.
5. Loosen the two screws securing the lamp unit
using a Philips screwdriver.
JVC is a registered trademark of JVC Company.
Lamp module manufactured by Lighting Technologies International, Baldwin Park, CA
®
p. 2
8. Tighten the two screws firmly on the new lamp
unit, taking care not to overtighten.
10. Replace the left speaker panel in the same
manner as it was removed in Step 3.
11. Replace the screw on the rear panel using your
fingers.
Plug the power cord back into the wall outlet and
turn on the power.
12. Reset the lamp timer by using the LAMP TIMER
RESET menu on your television.