JVC 0302MNV*ID*JVE - Manual (Page 28)

Filename [HRS5950EU3-EN.fm]
Masterpage:Left
28
EN
Page 28 December 4, 2001 6:32 pm
EDITING
Edit From A
Camcorder You can use a camcorder as the source player and your
recorder as the recording deck.
A
Make connections.
Connect the camcorder’s AUDIO OUT and VIDEO OUT
connectors to the recorder’s front panel AUDIO and
VIDEO input connectors.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
B
Set the recorder’s input mode.
Press AUX (number key “0”) and/or PR to select “F-1”.
C
Set the edit mode.
See “PICTURE CONTROL” on page 37.
D
Start the camcorder.
Engage the Play mode of the camcorder.
E
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step 3, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
Recorder
AUDIO OUT
VIDEO OUT
Camcorder
AUDIO
input
Player
VIDEO
input
Video cable (not provided)
Audio cable (not provided)
HRS5950EU3-EN.fm Page 28 Tuesday, December 4, 2001 6:32 PM