JVC CA-MXS5RMD - Manual (Page 44)

– 41 –
5
Press SET.
• If you have selected wrong tracks, press CANCEL,
then select the correct tracks.
6
Press ENTER/DEMO to finish the editing
procedure.
7
Press
0 for the MD recorder to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
To divide the joined tracks, see the DIVIDE function.
MOVE Function
This function allows you to move a track to the position
you prefer. It is useful to change the order of the tracks as
you like.
• To stop any time during editing process, press EDIT.
On the unit ONLY:
1
Insert an MD you want to edit into the MD loading
slot.
2
Press EDIT.
The source is changed to “MD,” and the MD recorder
enters editing mode (with DIVIDE function selected).
• If “MOVE” is not shown (“ – – – –” appears instead),
you cannot move the tracks.
JOIN Function
This function allows you to join two adjacent tracks into
one track.
• To stop any time during editing process, press EDIT.
On the unit ONLY:
1
Insert an MD you want to edit into the MD loading
slot.
2
Press EDIT.
The source is changed to “MD,” and the MD recorder
enters editing mode (with DIVIDE function selected).
• If “JOIN” is not shown (“ – – – –” appears instead),
you cannot join the tracks.
3
Push the joy control downward (
1 ) or upward
(
¡ ) to select “JOIN,” then press SET.
4
Push the joy control downward ( 1 ) or upward
(
¡ ) to select the two adjacent tracks you want
to join.
Ex. When you want to join tracks 2 and 3
EN38-43.CA-MXS5RMD[B]/f 99.9.14, 1:54 AM 41