JVC GR-DVL915 - Manual (Page 27)

EN
27
To Delete Unwanted Still Images . . .
.... when unwanted still images are stored in the memory
card or its memory is full, refer to “Deleting Images”
(
੬
pg. 32) and delete unwanted still images.
To Remove The Shutter Sound . . .
.... when you do not want to hear the shutter sound, set
“BEEP” to “OFF” in the Menu Screen (
੬
pg. 46, 48).
The sound is no longer heard from the speaker.
NOTES:
● Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot
recording will be performed in the FULL mode during
Digital Zoom or Night-Alive (
੬
pg. 38).
● Even if “DIS” is set to “ON” (
੬
pg. 47), the Stabilizer
will be disabled.
● If Snapshot recording is not possible, “PHOTO” blinks
when SNAPSHOT is pressed.
● If Program AE with special effects (
੬
pg. 38) is
engaged, certain modes of Program AE with special
effects are disabled during Snapshot recording. In such a
case, the icon blinks.
● If shooting is not performed for approx. 5 minutes when
the Power Switch is set to “ ” or “ ” and power is
supplied from the battery pack, the camcorder shuts off
automatically to save power. To perform shooting again,
set the Power Switch to “OFF”, then to “
” or “ ”.
● The Motor Drive mode (
੬
pg. 42) is disabled when the
VIDEO/DSC Switch is set to “ ”.
● Still images taken are compliant to DCF (Design rules for
Camera File systems). They do not have any compatibil-
ity with devices which are not compliant to DCF.
FULL
Snapshot mode
with no frame*
PIN-UP
Pin-Up mode*
FRAME
Snapshot mode
with frame*
MULTI-4
Multi-Analyzer 4
* There is the sound effect of a shutter closing.
MULTI-9
Multi-Analyzer 9