John Lewis JLWD 1408 - Manual (Page 27)

27
Emergency emptying out
If the water is not drained, proceed as follows to empty
out the machine:
• Pull out the plug from the power socket;
• Close the water tap;
• If necessary, wait until the water has cooled down;
• Open the pump door;
• Place a bowl on the floor and place the end of the
emergency emptying hose into the bowl. Remove its
cap. The water should drain by gravity into the bowl.
When the bowl is full, put the cap back on the hose.
Empty the bowl. Repeat the procedure until water
stops flowing out;
• Clean the pump if necessary as previously described;
• Replace the emergency emptying hose in its seat after
having plugged it;
• Screw the pump cover again and close the door.