GE RM24948 User Manual

Page 4

Using Your Remote

Code Retrieval

Code Retrieval lets you identify the four digit library
code stored under your device button. For example,
if you want to find out what four digit code is stored
under your TV device button, follow the six steps
below:

1. Press and hold the SETUP button until

the red indicator stays on, then release
the SETUP button.

2. Press and release the desired device

button (TV, VCR, etc.). The red
indicator blinks, then stays lit.

3. Press and release the SETUP button.

The red indicator blinks once and
remains lit.

4. To find the first digit for the code stored

under the device button pressed in step
2, press REW and count the number of
blinks.

Setting up using Code Search

If you cannot find a 4 digit code in the Code Table
that operates your TV, try searching for the code as
follows:

1. Manually turn on the device (TV, VCR, etc.) to

be controlled.

2. Press and hold the SETUP button until

the red indicator stays on, then release
the SETUP button.

3. Press and quickly release the desired

device button (TV, VCR, etc.). The red
indicator blinks off once.

4. Press the POWER button

repeatedly (up to 300 times) until
the device to be controlled turns off.
The red indicator blinks off with each
button press.

5. Press and release STOP to install the

code.

5. To find the second digit, press Play

and count the number of blinks.

6. To find the third digit, press FF and

count the number of blinks.

Write your codes down here for easy reference
later.

Device

Device stored Code

CBL/AUX
VCR/DVD