John Deere AT-3306-J - Manual (Page 9)

Straight Line Single Piston Sander Operator's Manual 9
Troubleshooting
Specifications
Loss of Power 1. Check air supply. For
rated performance, 90
PSI air pressure is
required at the tool, with
tool operating.
2. Check for wet or dirty
air. Wet air tends to
wash lubricant away.
Dirt or foreign matter will
impede the action of the
motor. If dirt or water
has entered the tool,
flush with John Deere
AT-4003.
3. Contact your customer
service.
1. Low air pressure
2. Improper lubrication or
dirt build up
3. Worn motor parts, or
other problems
Symptom Problem Solution
Pad size ---------------------------------------- 2 11 /16"X11"
Strokes per minute -------------------------- 2,600
Stroke length ---------------------------------- 1"
Weight ------------------------------------------- 5¼ lbs.
Length ------------------------------------------- 12"
Average air consumption ------------------ 5 CFM
Recommended hose size ------------------ 3/8" I.D.
Air inlet size ------------------------------------ 1/4" NPT
Maximum operating pressure ------------- 90 PSI