John Deere AT-3306-J - Manual (Page 4)

4 Straight Line Single Piston Sander Operator's Manual
READ OPERATING INSTRUCTIONS
Always become familiar with all the instructions and
warnings before operating any pneumatic tool.
RECOGNIZE SAFETY INFORMATION
This is the safety alert symbol. When you see this symbol on
your pneumatic tool or in this manual, be alert to the potential
for personal injury.
Follow recommended precautions and safe operating
practices.
UNDERSTAND SIGNAL WORDS
A "DANGER, WARNING or CAUTION" safety warning will be
surrounded by a "SAFETY ALERT BOX." This box is used to
designate and emphasize Safety Warnings that must be
followed when operating this tool.
Accompanying the Safety Warnings are "signal words" which
designate the degree or level of hazard seriousness. The
"signal words" used in this manual are as follows:
DANGER: Indicates an imminently hazardous situation
which, if not avoided, WILL result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, COULD result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided MAY result in minor or
moderate injury.
ALWAYS PROVIDE A COPY OF THIS MANUAL TO
ANYONE USING THIS EQUIPMENT. READ ALL
INSTRUCTIONS BEFORE OPERATING THIS TOOL
AND ESPECIALLY POINT OUT THE "SAFETY
WARNINGS" TO PREVENT THE POSSIBILITY OF
PERSONAL INJURY TO THE OPERATOR.
Safety