Using the remote control unit, Pg. 39), Installing the battery – JVC CU-VH1 User Manual

Page 39: Beam effective area (indoor use), Buttons and functions

Master Page: Right-Heading0

USING THE REMOTE CONTROL UNIT

The Full-Function Remote Control Unit can operate
this player from a distance. It also makes additional
playback functions possible. (

੬ pg. 40, 41)

Installing The Battery

The remote control uses one lithium battery
(CR2025).

Pull out the battery holder by inserting a pointed
instrument into the slot.

Insert the battery in the holder, and be sure to
have the “+” mark visible.

Slide the holder back in until you hear a click.

Beam Effective Area (indoor use)

When using the remote
control, be sure to point it at
the remote sensor. The
transmitted beam’s
approximate effective
distance for indoor use is
5 m (16 ft).

NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor is
directly exposed to sunlight or powerful lighting.

Buttons And Functions

A Infrared beam transmitting window

B S.SHOT (Snapshot) Button*

C AUDIO Button ........................... (੬ pg. 28, 29)

D PAUSE Button* .................................. (੬ pg. 40)

Up Button* ....................................... (

੬ pg. 41)

E SLOW Rewind Button ....................... (੬ pg. 40)

F REW Button* ............................... (੬ pg. 19, 22)

Left Button ....................................... (

੬ pg. 41)

G INSERT Button**