JVC CU-VH1 - Manual (Page 48)

48
EN
Master Page: Left
20. The indicators and the image
color on the LCD monitor are
not clear.
20. • This may occur when the
surface or the edge of the
LCD monitor is pressed.
20.
—
21. The cassette will not load
properly.
21. • The battery’s charge is low. 21. • Install a fully charged battery.
( ੬ pg. 11, 12)
22. The memory card cannot be
removed from the player.
22.
—
22. • Push in the memory card a
few more times. ( ੬ pg. 17)
23. Picture does not appear on the
LCD monitor.
23. • The LCD monitor’s brightness
setting is too dark.
23. • Adjust the brightness of the
LCD monitor. ( ੬ pg. 14)
24. Images on the LCD monitor
are jittery.
24. • The speaker volume is too
great.
24. • Turn the speaker volume
down. ( ੬ pg. 18)
25. The LCD monitor has become
dirty (ex. fingerprints).
25.
—
25. • Wipe them gently with soft
cloth. Wiping strongly can
cause damage. (
੬ pg. 55)
26. Time code does not appear. 26. • “TIME CODE” is set to
“OFF”.
26. • Set “TIME CODE” to “ON”.
( ੬ pg. 28, 31)
27. An error indication (E01, E02
or E06) appears.
27. • A malfunction of some kind
has occurred. In this case the
player’s functions become
unusable.
27. • ੬ pg. 51.
28. An error indication (E03 or
E04) appears.
28. • A malfunction of some kind
has occurred. In this case the
player’s functions become
unusable.
28. • ੬ pg. 51.
29. The remote control does not
work.
29. • “REMOTE” is set to “OFF”.
• The remote control does not
point at the remote sensor.
• The remote control batteries
are exhausted.
29. • Set “REMOTE” to “ON”.
( ੬ pg. 28, 30)
• Point at the remote sensor.
( ੬ pg. 39)
• Replace the batteries with
fresh ones. ( ੬ pg. 39)
TROUBLESHOOTING (cont.)
CU-VH1US.book Page 48 Friday, November 28, 2003 8:01 PM