JVC 0504CSH-ID-VT - Manual (Page 67)

Masterpage:Right-No-Heading
EN
67
Filename [XV3EX_10Subsidiary.fm]
Page 67 August 22, 2003 12:20 pm
NOTES:
● The unit is not equipped with the DTS decoding function.
● When you play back a DVD VIDEO or Audio CD disc with
DTS, use a DTS decoder to get correct signals from your
speakers. Never use the unit’s analog output connectors,
which output incorrect signals that may damage your
speakers.
● If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the amplifier
correctly, or set the level control of the amplifier connected to
the analog outputs to minimum.
Others Settings
8 RESUME — ON / OFF / DISC RESUME
When this function is set to “ON”, you can use the resume
function. (
੬
pg. 32)
ON : You can start playback from the resume point of the placed
disc.
OFF : You cannot use the resume function.
DISC RESUME : The unit retains a memory of the resume points
of the last 30 discs played back, even though they have been
ejected.
NOTE:
This function is not available for Audio CDs and MP3 discs.
8 ON SCREEN GUIDE — ON / OFF
When this function is set to “ON”, the unit can display “on-
screen guide” icons or characters which show the conditions of
the unit or disc.
Playback discs
Output
STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY
DVD VIDEO with
48 kHz, 16/20/24 bit linear
PCM
48 kHz, 16 bit linear PCM
DVD VIDEO with DTS DTS bitstream 44.1 kHz, 16 bit stereo linear PCM
DVD VIDEO with Dolby
Digital
Dolby Digital bitstream
48 kHz, 16 bit stereo linear
PCM
Audio CD/Video CD 44.1 kHz, 16 bit stereo linear PCM
Audio CD with DTS DTS bitstream 44.1 kHz, 16 bit stereo linear PCM
MP3 disc Linear PCM
XV3EX_01.book Page 67 Friday, August 22, 2003 12:21 PM