JBL S5160 - Manual (Page 11)

General Information
A Synthesis One installation utilizing the benefits of bi-
amplification of the front speakers incorporates a total
of four power amplifiers; two S5160’s, and two S800’s.
Eight of the 10 channels on the S5160’s are to be used
for driving the high-frequency and low-frequency inputs on
the left, center and right speakers, as well as the two side
ambient speakers, as indicated in the chart on page 8.
Please also refer to the connection diagram on page 14.
Use the simplified connection diagrams on the following
pages to help you understand how to connect the S5160
amplifier to a JBL Synthesis system. These diagrams are
intended to show the signal flow through the system. For
more detail in making these connections, please refer to
the JBL Synthesis Certified Dealer Installation Manual.
Connect DIN and audio cables between system components, as
shown on the following pages. Make sure that on all power
amplifiers the Power switches are in the depressed (ON)
position and that the
Manual On/Auto On switches ¶
are in the Auto On position. Operated in this mode, all of
the components will turn on with one touch of the Power
switch on the surround processor’s remote control.
4.0
CONNECTING YOUR
JBL SYNTHESIS SYSTEM
11
SDP-40
SDEC-1000A
S800
S5160
Top
#1
#2
#3
#4
4.1 JBL SYNTHESIS ONE:
SUGGESTED RACK-MOUNTING
ORDER
S5160 OM 5/31/05 2:18 PM Page 11