JVC DLARS20 - Manual (Page 2)

2
7. For the question “What do you want the wizard to do?”, click on “Install the software automatically
(Recommended)”. Then click “Next”.
8. The driver will be installed and a confirmation message is displayed that the installation is finished.
9. If the driver does not install automatically, it can be installed manually. The USB Driver and .INF file can be
found at \Program Files\ILA‐FPJ\Updater\HD750_V1_1\.
10. When the driver is installed successfully, message “Found New Hardware. Your new hardware is installed and
ready to use.”
11. Next step is to update the projector firmware. If you are going to update the firmware immediately after USB
driver installation, leave the projector in Download Mode and proceed to step 3 of the Firmware Update
procedure.