Edit to another vcr – JVC HR-J3006UM User Manual

Page 65

Edit To

Another VCR

You can use your VCR as the player and another VCR as the
recorder.

EDITING

MAKE CONNECTIONS

Connect an AV cable between your VCR's VIDEO OUT

and AUDIO OUT connectors and another VCR’s
VIDEO IN and AUDIO IN connectors.

● When connecting to a Hi-Fi VCR, connect your

VCR's AUDIO OUT connector to the AUDIO IN L
connector on the Hi-Fi VCR.

LOAD CASSETTES

Insert the playback cassette into your VCR and the

cassette to be recorded on into the other VCR.

SET RECORDER’S INPUT

MODE

Set the other VCR's auxiliary (AV) input mode.

SELECT "EDIT" FOR PIC-

TURE CONTROL SET MODE

Follow the "Picture Control" section on page 19, then

select "EDIT".

NOTE:

When you select "EDIT" to dub tapes, be sure to select
"AUTO" or ("NORM" when "VIDEO CALIBRATION" is
set to "OFF") after you finish dubbing the tapes.

START PLAYER

Press PLAY on your VCR.

NOTE:

If you don't want to record the superimposed indication
on the edited tape, be sure to set "SUPERIMPOSE" to
OFF before pressing

PLAY

(

੬

pg. 20).

START RECORDER

Set the other VCR to its record mode.

VIDEO IN

AUDIO IN

AUDIO OUT

Player

Your VCR

VIDEO OUT

Audio/Video Cable

(not supplied)

Recorder

Another VCR

PLAY