JBL AVR580 - Manual (Page 4)

DVD PLAYER
VCR (Video 1) TV or Video Monitor (Video 3)
In/Rec
Out/Play
In
Out
L R Video
L R
Video S-Video Component Video
Y Pb Pr
Component Video
Y Pb Pr
Component Video
Y
Pb
Pr
Optical Coax
Cable or Sat or HDTV Set-Top Box (Video 2)
Out
L R Video S-Video
Optical Coax
L R Video S-Video
COMP V1 COMP V2
REGION SELECTOR
VIDEO CONNECTIONS
Device Connection Options : Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 4, Coax 3 and Optical 3 inputs are on the front panel of the receiver.
Device Input Name Audio Input Connections Audio Output Connections Video Connections
CD Player CD CD L/R Inputs, Optical Digital 1 or 2, or Coaxial Digital 1 or 2 Not required Not required
DVD Player DVD Coaxial Digital 1 or 2, Optical Digital 1 or 2, or DVD L/R Inputs Not required Component, Video 2, DVD Composite or S-Video
VCR Video 1 Video 1 L/R Inputs Video 1 L/R Outputs Video 1 Composite or S-Video Input and Output
Cable Box or Satellite Receiver Video 2 Video 2 L/R Inputs, Optical Digital 3 * , or Coaxial Digital 3 * Inputs Not required Component Video 2, Video 2 Composite or S-Video Input
Audio Recorder Tape Tape L/R Inputs, Optical Digital 1/2 ** or Coaxial Digital 1/2 ** Inputs Tape L/R Outputs, Digital Optical ** or Coaxial Outputs ** Not required
TV or Projector Video 3 Video 3 L/R Inputs Not required Monitor-Out Component, Composite and/or S-Video
* Check with your cable service provider to determine whether digital audio is available for all channels. It may be necessary to make BOTH analog and digital connections if it is not. ** Digital audio recorders only.
250 Crossw
ays P
ark Drive
,W
oodbury
,N
ew
Yo
rk 11797 www
.jbl.com © 2004 Harman International Industries
,Incorpor
ated P
art No
.559
29050
FIGURE 5 – VIDEO CONNECTIONS
Dashed lines (– – – –) indicate coax and optical digital audio connections. Choose either type (but not both) for each
digital audio source.
Dotted lines (••••) indicate component, composite or S-Video connections. Component video is the preferred connection
when available, but you may use any of the three types (but not more than one). When component, composite and
S-Video sources are connected to the AVR you must also connect all outputs from the AVR to your TV.
®
PRO SOUND
COMES HOME
™