Jet Tools HBS-814GH - Manual (Page 7)

7
Unpacking
Open shipping container and accessory boxes,
and check for shipping damage. Report any
damage immediately to your distributor and
shipping agent. Do not discard any shipping
material until the Band Saw is assembled and
running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
1 Band Saw
2 Leveling Stands (with hex nuts)
2 Wheels
1 Axle
4 Flat Washers
2 Split Pins
1 Stock Stop
1 Stock Stop Rod
1 Can White Touch-Up Paint
1 Overload Fuse 10A
1 Owner's Manual
1 Warranty Card
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.