JVC KD-AR5500 eu - Manual (Page 26)

26
ENGLISH
General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM category.
You can move to a different category by
simply changing the PSM items.
3
Select a PSM item.
4
Adjust the PSM item selected.
5
Repeat steps 2 to 4 to adjust the
other PSM items if necessary.
6
Exit from the setting.
Indications Selectable settings, [reference page]
MO
V
IE
Demo
Display demonstration
All Time: [Initial]; Display demonstration (animation) appears.
ImageLink: To show a still image while playing back an MP3/
WMA track, [12, 14, 43].
Interval: Display demonstration (animation) and playback
source indication appears alternately.
Off: Cancels.
• These graphics appear if no operation is done for about
20 seconds.
Graphics
Graphics You can activate the graphic screen using either movie or picture,
[25].
UserMovie: Your edited animation stored in “MOVIE” is
activated.
UserSlide: Your edited still images stored in “PICTURE” are
activated and shown in sequence.
UserPict.: [Initial]; One of your edited still images stored in
“PICTURE” is activated.
KeyIn CFM
Key-in confirmation On: [Initial]; An animation screen appears when you turn on or off
the power, change the source, and when you select an i-EQ.
Off: Cancels.
EN20-27_AR5500_LHX550[J]f.indd 26 EN20-27_AR5500_LHX550[J]f.indd 26 12/1/04 6:33:50 PM 12/1/04 6:33:50 PM