How to attach the core filter – JVC GR-D290 GR-D270 User Manual

Page 12

Text mode
Original mode

GETTING STARTED

MasterPage: Left

How To Attach The Core Filter

Attach the core filters to the cables. The core
filter reduces interference.

Release the stoppers on both ends of the

core filter.

Run the cable through the core filter, leaving

approx. 3 cm (1-3/16") of cable between the
cable plug and the core filter.
Wind the cable once around the outside of the
core filter as shown in the illustration.

Close the core filter until it clicks shut.

NOTES:

● Take care not to damage the cable.

● When connecting a cable, attach the end with the

core filter to the camcorder.

Stopper

3 cm (1-3/16")

Wind once.

Core filter

GR-D290_270US.book Page 12 Tuesday, November 30, 2004 9:53 AM