JL Audio Stealthbox SB-T-TACDC/10W1v2 - Manual

I n s t a l l a t I o n G u I d e
for the
SB-T-TACDC/10W1v2
2005 - up toyota tacoma double Cab
Thank you for choosing a JL Audio Stealthbox ® for your automotive sound system. With proper
installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox ® installed by your authorized JL Audio
dealer. The installation professionals employed by your dealer have the necessary tools and experience
to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage
extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you
prefer to perform your own installation, please read this installation guide completely
before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox ® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
s t e P 1
Remove the all contents from the rear seating area.
Lower the second row seats.
Remove the two-piece plastic storage bins from the rear
wall.
Continued on Next Page
s t e P 2
The rear wall of the passenger’s side storage bin needs to
be cut out. Follow stePs 2 - 4 carefully. The cut lines are
indicated by the white dash lines. Use a cutting wheel for the
best results.
This cut line follows the corner line crease of the storage bin.
s t e P 3
This cut line also follows the corner line crease.
SB-T-TACDC/10W1v2_INSTR_SKU#011238
InstallatIon
d I F F I C u lt Y :
3
5
out
oF
estImated tIme:
2-3 HouRs