JVC GR-D750US - Manual (Page 18)

VIDEO RECORDING 18
EN
MasterPage: Left
Time Code
During recording, a time code is recorded on
the tape. This code is to confirm the location of
the recorded scene on the tape during
playback.
* Frames are not displayed during recording.
If recording starts from a blank portion, the
time code begins counting from “00:00:00”
(minute:second:frame). If recording starts from
the end of a previously recorded scene, the
time code continues from the last time code
number. If during recording a blank portion is
left partway through the tape, the time code is
interrupted. When recording is resumed, the
time code starts counting up again from
“00:00:00”. This means the camcorder may
record the same time codes as those existing
in a previously recorded scene. To prevent this,
perform Recording From The Middle Of A Tape
(
੬ pg. 18) in the following cases;
● When shooting again after playing back a
recorded tape.
●
When power shuts off during shooting.
● When a tape is removed and re-inserted during
shooting.
● When shooting using a partially recorded tape.
● When shooting on a blank portion located
partway through the tape.
●
When shooting again after shooting a scene
then opening/closing the cassette holder cover.
NOTES:
● The time code cannot be reset.
●
During fast-forwarding and rewinding, the time
code indication does not move smoothly.
● The time code is displayed only when “TIME
CODE” is set to “ON”. (
੬ pg. 24)
Recording From The Middle Of A Tape
1) Play back a tape or use Blank Search
(
੬ pg. 20) to find the spot at which you want to
start recording, then engage the Still Playback
mode. (
੬ pg. 19)
2) Set the Power Switch to “REC” while
pressing down the Lock Button located on the
switch, then start recording.
Auto/Manual Mode
Press AUTO button repeatedly to switch to
auto/manual recording mode. When manual
mode is selected, the indicator “
M” appears on
the LCD monitor.
Auto Mode : A
You can record using no special effects or
manual adjustments.
Manual Mode : M
Manual recording is possible by setting various
functions
.
12 : 34 : 24
Minutes
Seconds
Frames*
(30 frames =
1 second)
Display
MANUAL AUTO
GR-D750US_EN.book Page 18 Thursday, December 7, 2006 4:39 PM