JVC ImageMixer 1.7 LYT1282-001A - Manual (Page 34)

CREATING A VIDEO CD (cont.)
34
EN
Master Page: Left
Using ImageMixer Video CD Creation you can easily create Video CD from tape in the camcorder connected
with a USB cable.
NOTE:
There are differences in the following procedures whether your camcorder is equipped with D.S.C. (Digital
Still Camera) features or not.
1
Connect the camcorder to the PC with a USB cable.
● Refer to “Connections (Windows ® )” in “SOFTWARE INSTALLATION AND USB CONNECTION
GUIDE”.
2 Insert a blank CD-R disc in the CD-R drive.
3
Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”. (Only for D.S.C. equipped
models)
4
Set the camcorder’s Power Switch to “PLAY” while pressing down the Lock Button located
on the switch.
The camcorder is now on.
5 On the ImageMixer screen, click the Video CD Creation startup button.
The Video CD Creation screen appears.
6 Select the drive and the speed for writing to the disc.
● Be sure to set the writing speed to the setting recommended by the drive manufacturer.
Creating a Video CD from tape (Windows ® Only)
Video CD Creation startup
Click to select the drive.
Click to select the writing speed.
Option
Start
CONTINUED ON NEXT PAGE
M4D3+DSC_Soft.book Page 34 Tuesday, December 16, 2003 2:08 PM