JVC RC-EZ38SJ - Manual (Page 21)

17
Presetting stations
You can preset 30 FM and 15 AM stations.
RANDOM
MUTING EQ
1 2 3
4 5 6
7 8
9 0 VOL
REMOTE CONTROL UNIT
TAPE
TUNER/ BAND CD USB
REPEAT
SLEEP
MENU/ FM MODE
STOP/ ENTER
PROGRAM/ PRESET
STANDBY/ ON /
3 2, 4 3 3 2, 4
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 3
again.
Note:
In some cases, test frequencies have been already
memorized for the tuner since the factory examined the
tuner preset function before shipment. This is not a
malfunction. You can preset the stations you want into
memory by following the presetting method.
1 Tune in the station you want to preset.
2 Press STOP/ENTER.
The preset number starts blinking in the display
window.
91.50 MHz
MEMORY CH 04
FM
STEREO
Preset number
3 Press 4 or ¢ to select the preset number.
4 Press STOP/ENTER.
“STORED” is displayed and the tuned station is
stored.
STEREO
91.50 MHz
STORED
FM
Repeat steps 1 to 4 to preset other stations, using
different preset numbers.
Tuning in a preset station
1 Press TUNER/BAND to select the band, FM or
AM.
2 Press PROGRAM/PRESET.
3 Press 4 or ¢ to select the preset number.
You can use the number buttons on the remote control
unit to select the preset number directly.
Example:
To select preset number 5, press 5.
To select preset number 15, press 0, 1, then 5.
To select preset number 20, press 0, 2, then 0.
Note:
If you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
03_01-22_RC-EZ38S.p65 06.6.26, 8:48 PM 17