JVC 20981IEN - Manual (Page 21)

17
Using the Timers
The timers let you control listening and recording functions
automatically.
Setting the Clock
• When you plug the AC power cord into the wall outlet, the
CLOCK indicator flashes on the display.
You can set the clock whether the System is on or off.
Notes:
• The clock must be correctly set for the timers to work.
• The procedure must be completed within 2 minutes. Other-
wise, the setting is cleared and must be repeated from the
beginning.
1 Press the CLOCK button on the Unit for
more than 2 seconds.
The hour digits rapidly flash on the display.
2 Press the ¢ or 4 button to set the
hour.
Pressing the ¢ button moves the hour forwards and pressing
the
4 button moves it backwards. Hold down the button to
move the hour rapidly.
3 Press the CLOCK button.
The minute digits rapidly flash on the display.
4 Press the
¢ or 4 button to set the
minute.
Pressing the
¢ button moves the minute forwards and
pressing the
4 button moves it backwards. Hold down the
button to move the minute rapidly.
5 Press the CLOCK button again.
The selected time is set and the seconds start counting from 0.
The CLOCK indicator remains lit on the display.
CAUTION:
If the System is unplugged, or a power failure
occurs, the timer setting will be lost. You will
need to reset the clock first, then the timer.
Note: The clock may gain or lose 1 to 2 minutes per month.
ON
OFF CLOCK
SLEEP
¢
4
Timer indicator
ON time, OFF time
CLOCK
TIMER
(For 2 seconds)
or
ON SLEEP
ON SLEEP
OFF
SLEEP
OFF
SLEEP
DOWN UP
CLOCK CLOCK
SLEEP
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be activated at
the same time every day. It can be canceled and re-activate
whenever you wish.
The Timer indicator on the display shows when the Daily Timer
you have set will be activated.
Notes:
• Finish each step within 30 seconds. Otherwise, the setting is
cleared and the procedure must be repeated from the beginning.
• The clock must be correctly set for the timers to work.
If the clock has not been set, the CLOCK indicator will flash
on the display when you press the TIMER button for more than
2 seconds, and then the display alternates between “ADJUST”
and “CLOCK” for about 5 seconds.
1 Press the TIMER button on the Unit for
more than 2 seconds.
The ON indicator lights up, and then the current ON time
flashes on the display. (Example: 12:00)
2 Set the ON time. (Example: 12:15)
Press the ¢ or 4 button on the Unit to set the hour you
want the Unit to come on.
Pressing the
¢ button moves the hour forwards and pressing
the 4 button moves it backwards. Hold down the button to
move the hour rapidly. Press the TIMER button to adjust the
minute.
3 Set the OFF time. (Example: 13:15)
1. Press the TIMER button on the Unit.
The hour digits of the current OFF time flashes, and then
the OFF indicator lights up on the display.
2. Press the ¢ or 4 button on the Unit to set the time you
want the Unit to be turned off.
Pressing the
¢ button moves the hour forwards and
pressing the 4 button moves it backwards. Hold down
the button to move the hour rapidly. Press the TIMER
button again to adjust the minute.
REMOTE CONTROL RM-SUXV10E
CANCEL TREBLE
FM/AM
FM MODE DISPLAY SLEEP
AUX TAPE CD
CD
BASS AHB
PRO
DOWN RANDOM
UP DISPLAY MODE
AUTO PRESET
REPEAT
SET PROGRAM
VOLUME
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
DOWN UP MULTI CONTROL
TAPE FM/AM CD
STANDBY
PHONES
AUX
REC
REV MODE
AHB
PRO
TIMER
CLOCK
VOLUME
CD OPEN/CLOSE
EN10-22.UX-V100[B]f 12/12/00, 12:34 PM 17