beautypg.com

Cd direct recording, 15 one track recording – JVC 20981IEN User Manual

Page 19

background image

15

One track recording ––––––––––––––––––

1 Insert a blank or erasable tape into the

Cassette Deck.

2 Play the track on the CD you wish to

record.

3 Press the REC button on the Unit.

The CD player returns to the beginning of that track and the
track is recorded on the tape. After recording, the CD player
and Cassette Deck automatically stop.

CD Direct Recording

Everything on the CD goes onto the tape in the order it is on the
CD, or according to the order you have set in a program.

1 Insert a blank or erasable tape into the

Cassette Deck.

2 Insert a CD.

3 Press the CD

#/8 button.

4 Press the

7 button.

If you want to record specific tracks only, program the
tracks beforehand. You can check their total playback time
on the display during programing. (See page 11.)

5 If you want to record on both sides of a

tape, press the REV. MODE button on the
Unit until the

indicator is lit.

Make sure that the recording direction for the tape and the
Tape Direction indicator are correct. (See “Notes for using
Reverse mode for recording”.)

6 Select whether to have pauses left

between recorded selections.

If nothing is done, a non-recorded pause of about four
seconds will be automatically left between selections.

If you do not want pauses left between selections, do the
following before proceeding to the next step.

Press the CD

#

/

8

button twice.

The CD player enters Pause mode.

7 Press the REC button on the Unit.

The REC indicator lights up and the System begins recording.

When recording a CD onto tape with Reverse mode on:
If a song is recorded for more than 12 seconds (which
corresponds to the length of leader tape) but not finished
before the first side of tape comes to an end, this song will
automatically be recorded on the second side from its
beginning to avoid being split on both sides.
If a song is recorded for less than 12 seconds before the
first side of tape comes to an end, the song preceding this
song will also be recorded on the second side from its
beginning as it may not be completely recorded on the first
side because of leader tape.

After the CD player has played the entire CD, or all the
programed tracks, the tape automatically stops.

To stop at any time during the recording process,

press

the

7 button. The tape stops after 4 seconds.

Note:

When making SLEEP timer settings while doing CD Direct
recording, set enough time to allow for the CD to finish
playing, otherwise the power will go off before recording is
completed.

EN10-22.UX-V100[B]f

12/12/00, 12:33 PM

15