Jwin JL-K755 - Manual (Page 13)

Stereo CD Player with Dual Alarm Clock Radio V10M10_IM_EN_08072007
www.jWIN.com - 12 -
OPERATIONAL INSTRUCTIONS
Basic CD Operation-continued
Skipping Tracks
1. Press
the SKIP/SEARCH FORWARD button to skip to the next track.
2. Press the SKIP/SEARCH BACKWARD button to return to the previous track(s).
Adjusting the Volume
• Use
the VOLUME control knob on the left front side of the unit to adjust the sound level.
Additional CD Playback Features
Programming
The JL-K755 can store up to 20 CD tracks in memory
1. Slide
the ON/OFF/AUTO/BUZZ Switch to ON and the FM ST./FM/AM/CD Switch to CD.
2. Press the PROGRAM/REPEAT button and the word “PROG” appears on the LCD screen with the memory location “01” flashing.
3. Press the SKIP/SEARCH FORWARD or SKIP/SEARCH BACKWARD buttons to locate a desired track.
4. Press the PROGRAM/REPEAT button to confirm the selection. Once confirmed, the LCD screen will display the next memory location with “02” flashing.
5. Repeat steps 3 and 4 for each track you wish to program.
6. Press the PLAY/PAUSE button to begin programmed playback. The word “PROG” will show on the LCD screen.
Notes: Press the STOP button to cancel programmed playback. Repeat the above steps to create a new program.
Repeat Play
1.
During playback, press the PROGRAM/REPEAT button repeatedly to toggle the following options:
•
REPEAT 1: Repeats a single track
• REPEAT ALL: Repeats all tracks on the CD. When the program setting is in use, the word “PROG” will appear on the LCD screen and all
programmed tracks will repeat.
2. To cancel repeat playback, press the PROGRAM/REPEAT button until repeat icons disappear from the LCD screen.