JVC VS-DT88V - Manual (Page 24)

21
Using the CD Player
Englis
h
5 Press the Number button to select the
track to program.
Each time you press the Number button, the selected
track is added to the program.
• For the track number more than 10, press the +10
button then the Number button.
6 Repeat step 5 to select the other tracks
for the program.
7 Press the CD SELECT
3/8 button.
The System plays the tracks in the order you have pro-
grammed them.
■ Press the NEXT ¢ button once to skip to the beginning
of the next track in the program.
■ (For Audio CDs and Video CDs)
Press the 4 PREV. button to skip to the beginning of
the track being played. Press twice quickly to skip to the
beginning of the previous track in the program.
(For MP3 Discs)
Press the
4 PREV. button to skip to the beginning of
the previous track in the program.
■ To stop playing, press the 7 button once.
To confirm the programmed tracks, while the CD
player is stopped, each time press the NEXT
¢ or
4 PREV. button; the tracks making up the program will
successively appear in the programmed order.
To exit the program mode once, while the CD Player
is stopped, press the PLAY MODE button (or the
7 button
twice) to turn off the “PROGRAM” indicator and carry out
Normal Play.
To Modify the Program
Modify the contents of the program while the CD Player is
stopped.
Each time you press the CANCEL button, the last track in
the program is deleted. To add new tracks to the end of the
program, repeat above step 5.
• To delete all the tracks in the program, press the
7 button.
Random Play
(Using the Remote Control)
The tracks will play in random order when you use this
mode.
• To enter Random Play mode, stop playback first.
1 Press the PLAY MODE button until the
“RANDOM” indicator appears.
2 Press the CD SELECT
3/8 button.
The tracks are played in random order.
To skip a track during playback, press the NEXT ¢
button to jump to the next track in the random sequence.
To exit Random Play mode, while the CD Player is
stopped, press the PLAY MODE button (or the
7 button) to
turn off the “RANDOM” indicator and carry out Normal
Play.
Repeating Tracks
(Using the Remote Control)
You can repeat all tracks or individual track, as many times
as you like.
Press the REPEAT button.
The Repeat indicator changes with each press of the button,
as shown below.
= ALL =blank display = (back to the
beginning)
: Repeats one track.
ALL: In Normal Play mode, repeats all the tracks.
In Program Play mode, repeats all the tracks
in the program.
In Random Play mode, repeats all the tracks
in random order.
To exit Repeat mode, press the REPEAT button until the
Repeat indicator on the display goes out.
Child Lock
(Using the Unit)
You can prevent the unwanted CD ejection by locking.
• Before proceeding, check the position of the NEXT
¢
button, then turn off the System.
To Lock the CD Ejection
While holding down the NEXT
¢ button, press the %
button.
“LOCKED” appears on the display.
To Release the Lock
Perform the same procedure when you locked.
“UNLOCKED” appears on the display.
PROGRAM
Program order number
VS-DT68V-88V[UF]_EN.book Page 21 Wednesday, June 26, 2002 3:31 PM