JVC HR-J6008UM - Manual (Page 6)

Page 6 March 26, 2001 12:32 pm
Initial Settings
Plug&Play Setting
A
Perform Plug&Play setup
Press 1.
● The Language Select screen appears.
B
Select language
Press rt to move the highlight bar
(arrow) to your desired language
(ENGLISH or ESPAÑOL), then press OK or
e .
● The Clock Set screen appears.
C
Set time
Press rt to set the hour, then press OK or
e .
● Press and hold either button to delay or
advance the time by 30 minutes.
D
Set date
Press rt to set the date, then press OK or e .
● Press and hold either button to change the date by 15 days.
E
Set year
Press rt to set the year.
F
Start auto channel set
Press MENU.
● Receivable channels in your area are
automatically assigned to the CH+/– or
PR+/– buttons, and non-receivable
channels are skipped.
● If the tuner channels have been set
properly “SCAN COMPLETED” will be displayed on the screen.
If “SCAN COMPLETED–NO SIGNAL–” is displayed on the
screen, make sure that the antenna cable is connected to the
VCR properly and press OK or
e on the Remote. The VCR will
try Auto Channel Set again.
G
Return to normal screen
Press MENU.
Language Setting
Use language setting only if the language have not been set
correctly by the Plug&Play setting. The default setting is
“ESPAÑOL”.
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press rt to
move the highlight bar (arrow) to “INITIAL
SET”, then press OK or
e .
B
Select language
Press rt to move the highlight bar
(arrow) to “LANGUAGE”, then press OK or
e repeatedly until the desired language is
selected.
Press MENU to return to normal screen.
Clock Setting
Perform clock setting only if the clock has not been set correctly
by the Plug&Play setting.
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press rt to
move the highlight bar (arrow) to “INITIAL
SET”, then press OK or
e .
B
Access Clock Set screen
Press rt to move the highlight bar
(arrow) to “CLOCK SET”, then press OK or
e .
C
Set time, date and year
Press rt until the desired time appears,
then press OK or e . Set the date and year
in the same way.
● Holding
rt changes the time in
30-minute intervals, or changes the date
in 15-day intervals.
D
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or
e repeatedly until the item you want to change
blinks, then press rt .
LANGUAGE SELECT
ENGLISH
ESPAÑOL
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 01
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 01
HR-J6008UM-EN.fm Page 6 Monday, March 26, 2001 12:32 PM