Multi-brand remote control, Tv brand setting a – JVC HR-J6008UM User Manual

Page 13

Page 13

March 27, 2001 3:20 pm

Ⅵ BLUE BACK — ON/OFF

When this function is set to “ON”, the TV screen becomes all blue
in the following cases:

● When receiving a channel not in use.

● When stopping playback.

NOTE:

When you want to receive an unstable channel with poor signals,
set this function to “OFF”.

Ⅵ 2ND AUDIO RECORD — ON/OFF

● When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on both
the normal and Hi-Fi tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on
both the Hi-Fi and normal tracks.

● When this function is set to “OFF”, the SAP audio cannot be

recorded.

NOTES:

When the channel is changed on the VCR;

● The “STEREO” indication appears on the screen for about

5 seconds if the program is a stereo broadcast.

● The “SAP” indication appears on the screen for about 5 seconds

if the program is a SAP broadcast.

● Both indications appear when a stereo program is accompanied

by SAP sound.

Ⅵ AUDIO MONITOR — HI-FI/HI-FI L/HI-FI R/NORM/MIX

This VCR can record two sound tracks simultaneously (normal
and Hi-Fi) on a Hi-Fi stereo tape. You can select the sound track(s)
to listen to while playing back a Hi-Fi stereo tape. In addition,
when playing back a prerecorded tape containing two separate
audio programs on the Hi-Fi tracks, you can choose either one by
selecting either “HI-FI L” or “HI-FI R”.
HI-FI

: Normally select this. Hi-Fi sound is played back.

HI-FI L

: Sound on the left Hi-Fi channel is played back.

HI-FI R

: Sound on the right Hi-Fi channel is played back.

NORM

: Sound on the normal track is played back.

MIX

: Both sounds on the Hi-Fi track and normal track are mixed

and played back.

NOTES:

● While playing back a monaural tape, sounds on the normal

track will be heard regardless of this setting.

● If RF connection is used for viewing pictures on the TV, sound

will be monaural even though you select “HI-FI”.

● You can also use the AUDIO button on the Remote to select the

desired monitor sound.

Multi-Brand Remote Control

This Remote can control some functions of remote controllable
TVs, cable boxes or DBS (Direct Broadcast Satellite) receivers
listed below. Without setting, you can control a JVC TV.

NOTES:

● Some unit’s brands have more than one code. If the unit does

not function with a specified code, try other codes.

● Depending on the type of unit, some or all functions cannot be

operated using this Remote.

● It’s not possible to operate a unit not equipped with a remote

sensor.

● It’s not possible to set the Remote for both your cable box and a

DBS receiver at the same time.

● Once you have set the Remote to operate the unit, you do not

have to set it until you replace the batteries from the Remote.

TV Brand Setting
A

Turn on TV

Turn on the TV using the Power button on the TV or its Remote.

Set TV brand code

A Press and hold TV.

B Press the Number keys to enter your TV’s brand code.

C Press OK, and release TV. The TV should turn off.

Operate TV

First, press TV to set the Remote to TV mode, then press one of the
following buttons: POWER 1, TV/VCR, TV PR+/–,

(TV

Muting), TV %+/– (Volume), and the Number keys.

● For some brands, you must press ENTER after having pressed the

Number keys to enter a channel number.

TV BRAND

CODE

TV BRAND

CODE

JVC

CCE

GRADIENTE

GRUNDIG

LG/GOLDSTAR

MITSUBISHI

NEC

NOBLEX

PANASONIC

02, 11, 12, 16

PHILICO

PHILIPS

RCA

SANYO

SAMSUNG

SHARP

SONY

TOSHIBA

05, 09, 17

– Other Functions –

HR-J6008UM-EN.fm Page 13 Tuesday, March 27, 2001 3:20 PM