JBL FM8SUB - Manual (Page 7)

FM8SUB
Step One:
Remove the grille from the
subwoofer frame. Step Two:
Determine the correct
subwoofer location.
≥ 1-1/2"
≥ 1-1/2" ≥ 1-1/2"
Step Three
Cut the drywall.
Step Four:
Loosen the eight phillips head
screws until the locking tabs
turn inward. Step Five
Connect the speaker wires to
the baffle assembly. Step Six:
Place the subwoofer in the wall.
Step Seven:
Screw down each of the eight
phillips head screws. The tabs
will swivel into place and
secure the unit to the rear
surface of the drywall. Step Eight
Replace the metal grille.
FM Series Owner’s Manual 7/22/98 9:27 AM Page 7