beautypg.com

Return to normal display, Set date and time, Set just clock – JVC HR-A230EK User Manual

Page 9: Set clock data source preset position, Start clock operation, Manual clock set

background image

9

q

6

RETURN TO NORMAL

DISPLAY

4

Once clock setting is completed, press CLOCK to return
to the normal display.

1

2

4

5

3

6

8

0

7

9

1

3

2

6

NOTES:

Just Clock (when set to "ON") enables adjustment of the
recorder's built-in clock every hour on the hour, except for 11
o'clock in the evening and midnight.

Just Clock is not effective when . . .
– the recorder’s power is on (unless the recorder is tuned to

the same preset selected in the Just Clock display).

– the recorder is in the Timer mode.
– a difference of more than 3 minutes exists between the

built-in clock’s time and the actual time.

If Just Clock is set to "ON", the recorder’s clock is automati-
cally adjusted at the start/end of Summer Time.

Auto clock setting and Just Clock may not function properly
depending on the reception condition.

During Manual clock setting, if the day and month data are
invalid (such as 31st April), the month digits are cleared
automatically and the day digits begin blinking. Input the
correct data.

If, in step 3 of the Manual clock setting procedure, the year
digits are automatically cleared and the day digits begin
blinking, it is possible that you have input 29th February for a
non-leap year. Input the correct data.

SET DATE AND TIME

3

Press PUSH JOG

%fi to set the hour, then press OK. The

“minutes” display begins blinking. Repeat the proce-
dure to set the minutes, day, month and year.

After inputting the year, press OK and the Just Clock
display appears.

SET JUST CLOCK

4

The default setting is “ON”. Set as desired by pressing
PUSH JOG

%fi, then press OK.

● If you set to “OFF”, you can disregard the next step as

you won’t be able to receive regular clock adjustments.

SET CLOCK DATA SOURCE

PRESET POSITION

5

The recorder is preset to receive clock setting and
adjustment data from preset position 1. Press PUSH
JOG

%fi to set the preset position to the number

representing the station transmitting clock setting data,
then press OK.

START CLOCK OPERATION

6

Press CLOCK.

Manual Clock Set

M

D

Year

Day

Month

Hour

Minutes

3,4,
5

OK

PUSH JOG

3,4,
5

CLOCK