John Lewis SBSKITB User Manual
Page 10
10
•
«A» Fix the joining bracket with four 4.2x13 self-tapping screws (bag «3») using the holes in the sides.
•
The bracket must be positioned so that the side of the bracket with the hole in the centre part protrudes
as shown in fig. «A».
•
«B» Fix the joining bracket with six 4.2x13 self-tapping screws (bag «3») using the holes in the sides.
•
«C» Fix the joining bracket with four 4.2x13 self-tapping screws (bag «3») using the holes in the sides.
•
The bracket must be positioned so that the side with middle hole is turned down as shown in fig. «C».