Tape operations, Listening to a tape – JVC Instructions User Manual
Page 10
10
ENGLISH
1
Open the control panel.
2
1. Insert a cassette into the cassette
compartment.
The unit turns on and tape play starts automatically.
2. Close the control panel by hand.
• When one side of the tape reaches its end during play, the other side of the tape
automatically starts playing. (Auto Reverse)
3
Select the tape direction.
Each time you press the button, the tape direction changes
alternately – forward (
) and reverse (
).
TAPE OPERATIONS
Listening to a tape
Note on One-Touch Operation:
When a cassette is already in the cassette compartment, pressing TAPE
2 3 turns on the
unit and starts tape play automatically.
1
3
TAPE
To play back tapes recorded with the Dolby B NR
Press
MO RND(Dolby NR/Monaural/Random) to set the Dolby B NR* system. The
indicator lights up, and “DOLBY B” appears on the display for several seconds.
To cancel the Dolby B NR, press the same button again.
* Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY” and the double-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
MO RND
EN10-13.KS-FX450[J]
99.11.26, 7:03 PM
10