Janome MEMORY CRAFT 10001 User Manual

Page 9

Machine Operating Buttons

1 Start/Stop Button

Press this button to start or stop the
machine. This button can be used either in
Ordinary Sewing Mode or Embroidery Mode.
In Ordinary Sewing Mode, the
machine starts running slowly for the first
few stitches, it then runs at the speed set by
the Speed Control Lever.

NOTE:
• The Start/Stop Button cannot be used

when the foot control is connected to
the machine.

2 Reverse Button

Patterns 1, 2, 8 and 9:
The machine will sew in reverse while the
Reverse Button is pressed.
All other patterns:
The machine will immediately sew locking
stitches and automatically stop when the
Reverse Button is pressed.

3 Auto-Lock Button

Patterns 1, 2, 8 and 9:
The machine will immediately sew locking
stitches and automatically stop when the
Auto-Lock Button is pressed.

All other patterns:
The machine will sew locking stitches at the
end of the current pattern and automatically
stop when the Auto-Lock Button is pressed.

4 Up/Down Needle Button

Press this button to bring the needle up or
down.

5 Auto Needle Threader Button

Press this button to thread the needle, and
simply follow the step-by-step instruction
diagrams displayed on the Visual Touch
Screen.

6 Speed Control Lever

Sewing speed can be controlled by the
Speed Control Lever.