Janome MEMORY CRAFT 10001 - Manual (Page 62)

61
Changing buttonhole width
Press the key, the adjusting window opens.
Press the key to increase the
buttonhole width.
Press the key to decrease the
buttonhole width.
Press the key to register the settings.
NOTE:
• The default setting is 5.0.
Changing buttonhole stitch density
Press the key to make the buttonhole
stitch density coarser.
Press the key to make the buttonhole
stitch density denser.
NOTE:
• The default setting is 0.45.
5.0 0.45 3.4
Default
Cancel
OK
5.0 0.45 3.4
Default
Cancel
OK
Adjust
OK
Adjust