Ba si c us e, Getting started – Jens of Sweden MP-500V User Manual
Page 4

GETTING STARTED
POWER ON
Press and hold the PLAY / PAUSE-button for more then 2 seconds.
POWER OFF
Make sure the player is set to Pause. Then press and hold the PLAY / PAUSE
button for more then 2 seconds.
HOLD
When Hold is activated the player will not respond when a button is pressed
until Hold is deactivated.
LOW BATTERY WARNING
This warning screen will show when the battery level is low.
When the battery level becomes to low for the player to operate the player will
turn off after saving any possible data.
CHARGING THE BATTERY
The player will automatically start charging the battery once it’s connected to a
computer or a travel charger through the USB-port.
USB MEMORY FUNCTION
The player functions as a UMS (Universal Mass Storage) which lets you easily
save and transfer files from your computer. The unit will automatically appear
on your computer as a Removable Disk.
1. Connect the player to the computer using the USB cable.
2. Copy the file or folder.
3. If the computer can’t find the player you may need to reinstall the player’s
firmware. (This can happen if there is a disk error on the player, which
can be caused by for example removing the player while file transfer is in
progress) See www.jensofsweden.com for the latest firmware.
PLAYBACK DURING BATTERY CHARGE
It’s possible to play files while charging the battery.
1. When charging the battery through the computer (USB) press the MENU
button. You will then be asked if you wish to exit USB Mode.
2. If you select Yes the file transfer mode will become inactive and the play
mode will become active.
WARNING! Before you switch mode, make sure any possible file transfers
are completed. If you abort a file transfer you may damage the players flash
memory and you may be forced to re-format and re-install the players firmware
in which case you will lose all data stored on the player.
RESET
LINE-IN
MIC
USB 1.1
HOST
BA
SI
C
US
E
36