JBL Loudspeakers AS5 - Manual (Page 7)

AS SUB
Step One:
Remove the grille from the
subwoofer frame. Step Two:
Determine the correct
subwoofer location.
≥ 1-1/2"
≥ 1-1/2" ≥ 1-1/2"
Step Three:
Cut the drywall.
Step Four:
Loosen the eight phillips head
screws until the locking tabs
turn inward. Step Five:
Connect the speaker wires to
the baffle assembly. Step Six:
Place the subwoofer in the wall.
Step Seven:
Screw down each of the eight
phillips head screws. The tabs
will swivel into place and
secure the unit to the rear
surface of the drywall. Step Eight:
Replace the metal grille.
AS Series Owner’s Manual 9/11/98 12:51 PM Page 7