JBL Loudspeakers AS5 - Manual (Page 5)

Step One:
Remove the grille from the
speaker frame. Step Two:
Determine the correct speaker
location.
Template
Tape
Level
Step Three:
Determine the speaker-frame
location.
≥ 1-1/2"
≥ 1-1/2" ≥ 1-1/2"
Step Four:
Cut the dry wall. Step Five:
Place the mounting bracket on
the speaker frame using the
mounting guides (marked 3/8",
1/2", 5/8", and 3/4") corre-
sponding to the thickness of
the dry wall.
Kerf Line
Step Six:
Place the frame assembly in
the wall.
Step Seven:
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame.
Do not overtighten the baffle
screws. Step Eight:
Replace the metal grille.
Existing Construction
AS Series Owner’s Manual 9/11/98 12:51 PM Page 5